Heritage3d.org contact

Heritage3D

case studies...

The Heritage3D project is looking for case studies to highlight exemplar application of laser scanning. This includes the use of airborne systems, ground based time of flight/phase comparison scanners and close range triangulation scanners for any aspect of cultural heritage.

The case studies will be reviewed by a specialist Heritage3D steering group consisting of up to 8 project associates. The merits of the work will be discussed and summarised in a one page case study PDF that will be available from the project website.

If you would like to suggest a particular project send details of it to info@heritage3d.org. In your email briefly outline:

1) The aims the survey.

2) The end users of the acquired data.

3) The hardware/software employed and the problems encountered.

After receiving these details the Heritage3D project officer will contact you for more information and screenshots.

(Click on the image below to view a case study.)

Case Study 1	Recording the Upon Bishop fragment Contributed by: Conservation Technologies Conservation Centre Whitechapel Liverpool	Case Study 2	Recording a Norman Doorway Contributed by: Conservation Technologies Conservation Centre Whitechapel Liverpool
Case Study 3	Recording Rock Art Contributed by: Conservation Technologies Conservation Centre Whitechapel Liverpool	Case Study 4	Medieval Graffiti Contributed by: Conservation Technologies Conservation Centre Whitechapel Liverpool
Case Study 5	Copying Caligula Contributed by: Conservation Technologies Conservation Centre Whitechapel Liverpool	Case Study 6	3D Non-Contact Recording Contributed by: Conservation Technologies Conservation Centre Whitechapel Liverpool
Case Study 7	Recording Ramesses II Contributed by: Plowman Craven Associates Harpenden	Case Study 8	Recording Prehistoric Rock Art Contributed by: Tertia Barnett, Northumberland and Durham County Councils; Paul Bryan, English Heritage; Dr Jim Chandler, Loughborough University of Technology
Case Study 9	Leasowe Man’s Skull Contributed by: Conservation Technologies Conservation Centre Whitechapel Liverpool	Case Study 10	Going underground Contributed by: APR Services Southgate London
Case Study 11	Scanning Lion Salt Works, Marston Contributed by: APR Services Southgate London	Case Study 12	Scanning at the edge Contributed by: Pauline Miller School of Civil Engineering and Geosciences, University of Newcastle upon Tyne
Case Study 13	Automatic digital reconstruction of a roof truss Contributed by: Danilo Schneider Institute of Photogrammetry and Remote Sensing, Dresden Germany	Case Study 14	Airborne lidar for ancient landscapes Contributed by: Simon Crutchley English Heritage, Swindon UK
Case Study 15	Forest of Dean Contributed by: Simon Crutchley English Heritage, Swindon UK	Case Study 16	Recording UNESCO World Heritage Sites at Ayuthaya and Sukhothai, Thailand Contributed by: Dr Derek Lichti and Jochen Franke Curtin University of Technology Australia
Case Study 17	Earthwork Excavation Contributed by: Robert Shaw The Discovery Programme Ireland	Case Study 18	Scanning Gilded Surfaces Contributed by: Conservation Technologies Conservation Centre Whitechapel Liverpool